Description
The CPLLC UI Tile Garage Door is a Crestron Home tile for a garage door: Open, Stop and Close commands, with the Opening and Closing transitions between them. It is for UI purposes only: it drives no hardware by itself. Sequences connect it to the real garage door (relays, other drivers or extensions), and its events tell sequences each time it starts moving, stops, or reaches Opened or Closed.
Drivers->UI Tiles->Control Programming LLC->Garage Door (Latest OS3 Release Notes) (Download OS3 Latest Version)
Drivers->UI Tiles->Control Programming LLC->Garage Door (Latest OS4 Release Notes) (Download OS4 Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
The extension’s own license key, or a CPLLC site license key, is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Installer Options
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Garage Door license key. Leave blank when the site has a CPLLC site license.
- Show on Home Screen – Shows the tile on the Home screen (default off).
- Show in Room Screen – Shows the tile in its room (default on).
- Starting Pin Code – A numeric PIN that must be entered before the controls are shown. Blank means no PIN (the default). A new Starting Pin Code replaces a PIN changed from the keypad, so a forgotten PIN can be reset here.
- Seconds Pin Active – How long the controls stay unlocked after the last touch (default 10 seconds; 0 also means 10).
- Tile Clickable – Checked (the default): touching the tile opens or closes the Garage Door, or stops it while it moves. Unchecked: touching the tile opens the control page.
- Only Display Tile – Checked (the default): the tile has no control page. Unchecked: a “…” button on the tile opens the control page.
- Only Display Feedback – The state changes only when a Feedback action reports it (default off). When off, the state follows the last button pressed or action run.
- Seconds between Fully Closed/Opened – How long Opening is shown before the tile shows Opened (default 5 seconds; 0: Opened at once).
- Seconds between Fully Opened/Closed – How long Closing is shown before the tile shows Closed (default 5 seconds; 0: Closed at once).
- Enable Stop Button – Shows the Stop button and offers the Stop action (default on). Stop works only while the Garage Door is moving, so it needs a transition time above 0.
Actions
- Garage Door Open / Garage Door Close – Starts opening or closing, as the Open or Close button does.
- Garage Door Stop – Stops a move part way, as the Stop button does. Offered when Enable Stop Button is on.
- Garage Door Toggle – Opens when closed, closes when open.
- Garage Door Feedback Open / Feedback Close – Reports the garage door’s state: the tile shows Opened or Closed at once, with no transition, and reports the Opened or Closed event. With Only Display Feedback on, these are the only way the state changes.
- Extension Enable / Extension Disable – Enables or disables the Garage Door. A disabled Garage Door shows Disabled and ignores the tile and buttons.
Events
- Garage Door is Opening / Garage Door is Closing – A move started.
- Garage Door is Opened / Garage Door is Closed – A move finished, or a Feedback action reported the state. With Only Display Feedback on, only a Feedback action raises them.
- Garage Door is Stopped – Stop was pressed, the tile was touched while moving, or the Stop action ran. Use it to stop the real garage door.
- Extension Enabled / Extension Disabled – The Garage Door was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.
