Description
The CPLLC Gaposa LinkIT Platform brings Gaposa motorized shades into Crestron Home through Gaposa’s LinkIT RS-232 controller. The installer names the motors on the LinkIT’s 24 channels, and the platform adds each named motor to Crestron Home as a shade of its own, with Open, Stop and Close, tilt, and the motor’s preferred (My) position for sequences.
Drivers->Platform->Gaposa->LinkIT-RS232 (Latest OS3 Release Notes) (Download OS3 Latest Version)
Drivers->Platform->Gaposa->LinkIT-RS232 (Latest OS4 Release Notes) (Download OS4 Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
The platform’s own license key, or a CPLLC site license key, is entered in the platform’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Platform Installer Options
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Gaposa LinkIT Platform license key. Leave blank when the site has a CPLLC site license.
- Channel 1 Motor Name … Channel 24 Motor Name – The name of the motor on that LinkIT channel, which is the shade’s name in Crestron Home. Leave a channel blank when no motor is on it.
Shades
Each named motor is a Crestron Home shade. Touching its tile opens or closes it. With Only Display Tile unchecked, its … button opens its page: Open, Stop and Close, then Open Tilt and Close Tilt. The LinkIT reports nothing back, so the tile and page show what the shade was last told, and the transition times set how long it shows Opening and Closing.
Shades Installer Options
- Tile Clickable – Touching the tile opens or closes the shade (default on).
- Only Display Tile – Shows the tile alone, with no page of controls (default on). Uncheck it for Stop and tilt.
- Seconds between Fully Closed/Opened – How long the shade takes to open, so the page shows Opening until it is open.
- Seconds between Fully Opened/Closed – How long the shade takes to close, shown as Closing.
- Enable Stop Button – Shows the Stop button on the page (default off).
- Auto Enabled – Offers the auto close timer and Shade Open w/Auto Close (default off).
- Auto Time in Seconds – The auto close time is in seconds; unchecked, it is in minutes (default).
- Maximum Auto Time – The longest auto close time allowed, in the unit above (default 600).
Shades Actions
- Shade Open / Shade Close – Opens or closes it, as the Open or Close button does.
- Shade Stop – Stops it part way, as the Stop button does. Offered when Enable Stop Button is on.
- Shade Toggle – Opens it when closed, closes it when open.
- Shade Open Tilt Press / Shade Close Tilt Press – Tilts it open or closed, as the tilt buttons do.
- Shade Go To My Position – Sends the motor to its preferred (My) position.
- Shade Save My Position – Stores where the motor is now as its preferred (My) position.
- Shade Open w/Auto Close – Opens it, then closes it again after the number of minutes given. Offered when Auto Time in Seconds is off.
- Shade Open w/Auto Close (Seconds) – The same, in seconds (1 to Maximum Auto Time). Offered when Auto Time in Seconds is on.
- Shade Feedback Open / Shade Feedback Close – Sets the state the tile shows (Opened or Closed), without moving the shade.
- Extension Enable / Extension Disable – Enables or disables the shade. A disabled shade shows Disabled and ignores its tile and page.
Shades Events
- Shade is Opening / Shade is Closing – A move started.
- Shade is Opened / Shade is Closed – A move finished.
- Shade is Stopped – A move was stopped part way.
- Shade Open Tilt Pressed / Shade Close Tilt Pressed – A tilt button was pressed, on the page or by its action.
- Extension Enabled / Extension Disabled – The shade was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered (with a Starting Pin Code set).
Sequences
Each shade brings its actions and events (above) to Crestron Home sequences, under its name in Customize Actions & Events. Go To My Position in a scene, for example, brings every shade to its own preferred height at once.
