Description
Requires Crestron Home OS 4.12 or later.
The CPLLC Generac Mobile Link extension brings a Generac standby generator into Crestron Home through Generac’s Mobile Link cloud, signing in with the homeowner’s Mobile Link email and password. Its tile shows whether the generator is ready, running, exercising or in alarm, and whether it is carrying the house through a utility outage; its page lists the battery voltage, run hours, hours of protection and signal strength. Its events start sequences when the generator starts or stops, the utility power is lost or restored, an alarm comes or clears, maintenance comes due, the battery runs low, or the generator drops off line.
Drivers->Power Controller->Generac->Mobile Link (Latest Release Notes) (Download Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
The extension’s own license key, or a CPLLC site license key, is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Buyer beware: Generac does not publish an API for this product. This extension uses the unpublished protocol Generac’s own app uses, which Generac can change or turn off at a moment’s notice, without warning. If that happens the extension may stop working until it can be updated, and it may not be possible to update it.
Installer Options
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Generac Mobile Link license key. Leave blank when the site has a CPLLC site license.
- Show on Home Screen – Shows the tile on the Home screen (default off).
- Show in Room Screen – Shows the tile in its room (default on).
- Starting Pin Code – A numeric PIN that must be entered before the page opens. Blank means no PIN (the default).
- Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).
- Low Battery Voltage – Battery Low is raised when the battery falls below this voltage, and Battery OK once it is 0.3 V above it (for example 12.0). Blank for none.
- Mobile Link Email – The email address of the homeowner’s Mobile Link account.
- Mobile Link Password – That account’s password.
- Generator – With more than one generator on the account, the one this extension shows, by its name in the Mobile Link app or its serial number. Blank shows the first.
Actions
- Extension Enable / Extension Disable – Enables or disables the device. A disabled device shows Disabled and raises no events.
Events
- Generator Running / Generator Stopped – The generator started (for an outage or its exercise); it stopped.
- Exercise Started / Exercise Ended – Its scheduled exercise began; ended.
- Generator Ready / Generator Not Ready – It is in Auto, waiting to run; it no longer is (switched off, in alarm, running …).
- Utility Power Lost / Utility Power Restored – It started because the utility power failed; the power came back.
- Generator Alarm / Generator Alarm Cleared – A warning or an alarm code came; it cleared.
- Maintenance Due / Maintenance Done – Generac reports maintenance due; it no longer does.
- Battery Low / Battery OK – The battery fell below Low Battery Voltage; rose 0.3 V above it.
- Generator Offline / Generator Online – The generator or Mobile Link can’t be reached; it can again.
- Extension Enabled / Extension Disabled – The device was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered (with a Starting Pin Code set).
Generac and Mobile Link are trademarks of their respective owners. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This extension is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owners of Generac and Mobile Link.



