ecobee Platform

$200.00

The CPLLC ecobee Platform brings ecobee smart thermostats into Crestron Home.

SKU: CPLLC.SDK.Ecobee.Platform Category:

Description

Requires Crestron Home OS 4.12 or later.

The CPLLC ecobee Platform brings ecobee smart thermostats into Crestron Home. Every thermostat registered to the customer’s ecobee account becomes a Crestron Home thermostat of its own, named as it is in the ecobee app. Each thermostat’s page picks its mode, sets its heat and cool set points, runs the fan, holds one of its comfort settings (Home, Away, Sleep) or returns it to its schedule, and shows the temperature and humidity. The platform signs in to ecobee’s cloud with the account’s email and password, so nothing has to be wired; changes made at a thermostat or in the ecobee app are found by reading the thermostats at a set interval.

Drivers->Platform->ecobee->Cloud (Latest Release Notes) (Download Latest Version)

Windows utility that simplifies sideloading of drivers and extensions.

The platform’s own license key, or a CPLLC site license key, is entered in the platform’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.

All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.

Buyer beware: ecobee does not publish an API for this product. This platform uses the unpublished protocol ecobee’s own app uses, which ecobee can change or turn off at a moment’s notice, without warning. If that happens the platform may stop working until it can be updated, and it may not be possible to update it.

Platform Installer Options

  • Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
  • Enter License Key – The ecobee Platform license key. Leave blank when the site has a CPLLC site license.
  • ecobee Email – The email address used to sign in to the ecobee app.
  • ecobee Password – The password of that ecobee account.
  • Polling Enabled – Reads every thermostat every Polling Seconds, so changes made at a thermostat or in the ecobee app show in Crestron Home (default on).
  • Polling Seconds – How often every thermostat is read when polling is on, 30 to 3600 seconds (default 180). The thermostats report to ecobee about every three minutes, so shorter times show little sooner.
  • Temperature Scale – The scale every thermostat page shows its temperatures and set points in: As Reported (the default) keeps the scale the thermostat shows, Fahrenheit shows whole degrees and Celsius half degrees. A change shows once the platform is reloaded.

Thermostats

Each ecobee thermostat is a Crestron Home thermostat named as it is in the ecobee app. Its tile shows its mode, or Off; its page has the thermostat with the heat and cool set points and the temperature, a Humidity line, lists for Mode, Fan Mode and Smart, and a Sync button. Each list holds only what that thermostat can do.

Thermostats Installer Options

  • Show on Home Screen – Shows the thermostat’s tile on the Home screen (default off).
  • Show in Room Screen – Shows the thermostat’s tile in its room (default on).
  • Starting Pin Code – A numeric PIN that must be entered before the page’s controls work. Blank means no PIN (the default).
  • Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).

Thermostats Actions

  • Set Heat Setpoint / Set Cool Setpoint – Sets the thermostat’s heat or cool set point, in the scale its page shows (Temperature Scale): whole degrees in Fahrenheit, half degrees in Celsius.
  • Set Mode – Sets one of the thermostat’s modes.
  • Set Fan Mode – Sets the fan to Auto or On.
  • Set Smart – Schedule returns the thermostat to its program; a comfort setting (Home, Away, Sleep …) holds it; Hold holds the set points as they are.
  • Sync – Reads every thermostat from ecobee again.
  • Extension Enable / Extension Disable – Enables or disables the thermostat. A disabled thermostat shows Disabled and ignores its tile and page.

Thermostats Events

  • Temp Above Setpoint / Temp Below Setpoint – The temperature crossed the set point, once per crossing; never while the thermostat is off.
  • is On / is Off – The thermostat left Off, or was turned off.
  • Mode is <mode> – The thermostat’s mode changed to that mode (Mode is Off, Mode is Cool …, one for each of its modes), from Crestron Home, the ecobee app or the thermostat.
  • Fan Mode is … / Smart is … – The fan, or what the thermostat follows (Schedule, a comfort setting, Hold), changed to that choice; one event for each choice the thermostat offers.
  • Extension Enabled / Extension Disabled – The thermostat was enabled or disabled.
  • Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.

Sequences

Every thermostat’s actions and events are listed under Thermostats. The modes and comfort settings a sequence can pick are that thermostat’s own, named as the ecobee app names them.

ecobee is a trademark of its owner. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This platform is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owner of ecobee.