Description
The CPLLC Mantel Mount extension brings a Mantel Mount motorized TV mount into Crestron Home. Its tile shows where the mount is; its page jogs the TV up, down, left and right, stops it, sends it home, moves it to an elevation and azimuth, and recalls or saves three preset positions. Every control is also a sequence action, so a scene can bring the TV down when a movie starts. The extension talks to the mount directly over the local network (UDP), with no cloud account.
Drivers->Lift->Mantel Mount->MM 860 (Latest Release Notes) (Download Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
The extension’s own license key, or a CPLLC site license key, is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Installer Options
- IP Address/Hostname – The Mantel Mount’s address.
- Port – The mount’s UDP control port (default 81).
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Mantel Mount license key. Leave blank when the site has a CPLLC site license.
- Show on Home Screen – Shows the tile on the Home screen (default off).
- Show in Room Screen – Shows the tile in its room (default on).
- Starting Pin Code – A numeric PIN that must be entered before the page’s controls work. Blank means no PIN (the default).
- Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).
Actions
- Jog Up Press / Jog Down Press / Jog Left Press / Jog Right Press – Jogs the mount in that direction.
- Jog OK Press – Sends the mount home (the D-pad’s center).
- Stop Press – Stops the mount.
- Home Press – Sends the mount to its home position.
- Preset Recall 1 Press … Preset Recall 3 Press – Moves the mount to that preset position.
- Preset Save 1 Press … Preset Save 3 Press – Stores the mount’s current position as that preset.
- Elevation – Moves the mount to an elevation, 0 to 115, keeping its azimuth.
- Azimuth – Moves the mount to an azimuth, -23 to 23, keeping its elevation.
- Extension Enable / Extension Disable – Enables or disables the device. A disabled device shows Disabled and ignores its tile and page.
Events
- Jog Up Pressed / Jog Down Pressed / Jog Left Pressed / Jog Right Pressed – The mount was jogged in that direction, on the page or by a sequence.
- Jog OK Pressed – The D-pad’s center was pressed (the mount was sent home).
- Stop Pressed / Home Pressed – Stop or Home was pressed, on the page or by a sequence.
- Preset Recall 1 Pressed … Preset Recall 3 Pressed – That preset was recalled.
- Preset Save 1 Pressed … Preset Save 3 Pressed – That preset was saved.
- Extension Enabled / Extension Disabled – The device was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered (with a Starting Pin Code set).
