Description
Requires Crestron Home OS 4.12 or later.
The CPLLC Sub-Zero Platform brings Sub-Zero refrigerators, freezers and wine storage, Wolf ovens and Cove dishwashers into Crestron Home. It signs in with the Sub-Zero Group Owner’s App account, the same email and password as the app, and offers every connected appliance on the account for pairing. Each appliance gets a page of its own: a refrigerator or freezer its Operating Mode (Normal, High Use, Short Vacation, Long Vacation, Sabbath), its Ice Maker (Off, On, Max Ice), Night Ice and its set temperatures; an oven its cooking mode, the temperature inside it and Preheated; a dishwasher its wash cycle and the time left. Every mode and setting has its sequence action and events, and the appliance’s alerts (Door Ajar, Service Required, a water or air filter expired, Rinse Aid Low …) are events too. Sub-Zero’s cloud sends every change as it happens, so nothing is polled.
Drivers->Platform->Sub-Zero->Cloud: Sub-Zero Wolf Cove, developer Control Programming LLC (Latest Release Notes) (Download Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
The platform’s own license key, or a CPLLC site license key, is entered in the platform’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Buyer beware: Sub-Zero does not publish an API for this product. This platform uses the unpublished protocol Sub-Zero’s own app uses, which Sub-Zero can change or turn off at a moment’s notice, without warning. If that happens the platform may stop working until it can be updated, and it may not be possible to update it.
Platform Installer Options
- Owner’s App Email – The email address the Sub-Zero Group Owner’s App signs in with.
- Owner’s App Password – The password of that account. It is shown as typed, so the installer can check it.
- Appliance Addresses – Leave blank. Only used when no Owner’s App account is given (see Known Limitations).
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Sub-Zero Platform license key. Leave blank when the site has a CPLLC site license.
Appliances
Each appliance is paired on CPLLC’s appliance page, titled by what it is (Refrigerator, Freezer, Wine Storage, Oven, Dishwasher). Its tile shows its status; its page has the appliance’s lists side by side at the top (Operating Mode and Ice Maker on a refrigerator or freezer), then its switches and its set temperature, then the status, the door, what was last reported and when. Every control shows what the appliance reports, including changes made at the appliance or in the Owner’s App, and a change from Crestron Home reaches the appliance through Sub-Zero’s cloud within a second or two. Choosing a mode turns the others off: Short Vacation ends Long Vacation, Normal ends whichever was on.
Appliances Installer Options
- Show on Home Screen – Shows the appliance’s tile on the Home screen (default off).
- Show in Room Screen – Shows the appliance’s tile in its room (default on).
- Starting Pin Code – A numeric PIN that must be entered before the page’s controls work. Blank means no PIN (the default).
- Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).
- PIN / Show PIN – Not used with an Owner’s App account; leave blank and off.
Appliances Actions
- Set Operating Mode – Sets a refrigerator’s, freezer’s or wine storage’s operating mode: Normal, High Use, Short Vacation, Long Vacation or Sabbath, as the appliance has them.
- Set Ice Maker – Sets the ice maker to Off, On or Max Ice.
- Set <compartment> °F – Sets a set temperature within Sub-Zero’s range: Set Refrigerator °F (34 to 45), Set Freezer °F (−5 to 5), Set Wine °F (40 to 65).
- <Setting> On / <Setting> Off – Turns one of the appliance’s switches on or off: Night Ice On, Oven Light Off, Heated Dry On …, one pair for each switch on its page.
- Extension Enable / Extension Disable – Enables or disables the appliance’s page. A disabled appliance shows Disabled and ignores its tile and page.
Appliances Events
- Operating Mode is <mode> – The operating mode changed to that one, from Crestron Home, the appliance or the Owner’s App: Operating Mode is Long Vacation, Operating Mode is Normal …
- Ice Maker is <choice> – The ice maker changed to Off, On or Max Ice.
- <Setting> On / <Setting> Off – One of the appliance’s switches was turned on or off: Night Ice On, Sabbath Mode Off …
- Cycle Started / Cycle Ended – An oven was turned on or off; a dishwasher started or stopped washing.
- Cycle Paused / Cycle Resumed – A dishwasher’s wash was paused, or carried on.
- Cycle Finished / Load Removed – A dishwasher finished its wash, and later left Complete.
- Door Opened / Door Closed – A door of the appliance was left open, or closed again.
- Appliance Offline / Appliance Online – Sub-Zero’s cloud lost the appliance, or found it again.
- One event per alert – Each alert of the appliance’s kind, as listed above: Door Ajar, Service Required, Preheated, Rinse Aid Low …
- Extension Enabled / Extension Disabled – The appliance was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.
Sequences
Every appliance’s actions and events are listed under Appliances. An Away scene can, for example, set the refrigerators to Long Vacation with Set Operating Mode and back to Normal on return, or a sequence can announce Door Ajar or Rinse Aid Low.
Sub-Zero, Wolf and Cove are trademarks of their respective owners. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This platform is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owners of Sub-Zero, Wolf and Cove.



