GE SmartHQ Platform

$150.00

The CPLLC GE SmartHQ Platform brings GE Appliances washers, dryers, dishwashers and other SmartHQ appliances into Crestron Home.

SKU: CPLLC.SDK.SmartHQ.Platform Category:

Description

Requires Crestron Home OS 4.12 or later.

The CPLLC GE SmartHQ Platform brings GE Appliances washers, dryers, dishwashers and other SmartHQ appliances into Crestron Home. It signs in with the SmartHQ account, the same email and password as the SmartHQ app, and offers every appliance on the account for pairing. Each appliance gets a page of its own with its status (Idle, Running, Paused, Finished …), its cycle, the time left and its door, and Start and Stop buttons where the appliance takes them. Starting, finishing, a door opening and every alert the appliance can send (10 Minutes Left, Load Damp, Vent Blocked, Detergent Tank Low …) are events for sequences. It uses GE Appliances’ published SmartHQ API, and SmartHQ sends every change as it happens, so nothing is polled.

Drivers->Platform->GE Appliances->Cloud: SmartHQ, developer Control Programming LLC (Latest Release Notes) (Download Latest Version)

Windows utility that simplifies sideloading of drivers and extensions.

The platform’s own license key, or a CPLLC site license key, is entered in the platform’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.

All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.

Platform Installer Options

  • SmartHQ Email – The email address used to sign in to the SmartHQ app (an account without two-step sign-in).
  • SmartHQ Password – The password of that SmartHQ account. It is shown as typed, so the installer can check it.
  • Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
  • Enter License Key – The GE SmartHQ Platform license key. Leave blank when the site has a CPLLC site license.

Appliances

Each appliance is paired on CPLLC’s appliance page, titled by what it is (Washer, Dryer, Dishwasher …). Its tile shows its status; its page has Start and Stop, then the status, the cycle, the time left, the door (where the appliance reports one), the appliance’s model and serial number, and when it last reported. Stop is available while a cycle runs. Everything on the page is what the appliance reports to SmartHQ, including changes made at the appliance or in the SmartHQ app.

Appliances Installer Options

  • Show on Home Screen – Shows the appliance’s tile on the Home screen (default off).
  • Show in Room Screen – Shows the appliance’s tile in its room (default on).
  • Starting Pin Code – A numeric PIN that must be entered before the page’s controls work. Blank means no PIN (the default).
  • Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).

Appliances Actions

  • Start Press – Starts the appliance’s cycle, as its Start button does.
  • Stop Press – Stops the cycle, as its Stop button does.
  • Extension Enable / Extension Disable – Enables or disables the appliance’s page. A disabled appliance shows Disabled and ignores its tile and page.

Appliances Events

  • Cycle Started / Cycle Ended – The appliance started running, or stopped.
  • Cycle Paused / Cycle Resumed – The cycle was paused, or carried on.
  • Cycle Finished / Load Removed – The cycle finished, and later the appliance left Finished.
  • Door Opened / Door Closed – The appliance’s door was opened or closed, on an appliance that reports its door.
  • Appliance Offline / Appliance Online – SmartHQ lost the appliance, or found it again.
  • One event per alert – Each alert the appliance lists, as in the table above: 10 Minutes Left, Load Damp, Vent Blocked, Detergent Tank Low … SmartHQ’s own start and end of cycle alerts are Cycle Started Alert and Cycle Finished Alert.
  • Start Pressed / Stop Pressed – Start or Stop was pressed on the page.
  • Extension Enabled / Extension Disabled – The appliance was enabled or disabled.
  • Extension Is Enabled Changed – The Extension Is Enabled state changed.
  • Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.

Appliances States

  • Extension Is Enabled – Whether the appliance’s page is enabled, for a sequence’s If step.

Sequences

Every appliance’s actions, state and events are listed under Appliances. A sequence can, for example, announce Cycle Finished or 10 Minutes Left on the house audio, flash a light when the dryer reports Load Damp or Vent Blocked, or send a notification on Detergent Tank Low.

GE Appliances and SmartHQ are trademarks of their respective owners. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This platform is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owners of GE Appliances and SmartHQ.