Navien Platform

$150.00

The CPLLC Navien Platform brings Navien gas tankless water heaters, combi-boilers and boilers into Crestron Home through NaviLink, the service behind Navien’s NaviLink app.

SKU: CPLLC.SDK.Navien.Platform Category:

Description

Requires Crestron Home OS 4.12 or later.

The CPLLC Navien Platform brings Navien gas tankless water heaters, combi-boilers and boilers into Crestron Home through NaviLink, the service behind Navien’s NaviLink app. Every heater on the customer’s account becomes a Crestron Home device of its own, named as it is in the app. Its page turns it on and off, sets the hot water temperature, and on a model that heats the house turns the heating on and off and sets the heating water temperature; it shows what the heater is doing, the water temperature leaving it, and its inlet temperature, flow and gas use. Sequences can do the same, and can react when the heater starts or stops, when a setting changes, or when it reports an error. The platform signs in to NaviLink with the account’s email and password, so nothing has to be wired.

Drivers->Platform->Navien->NaviLink (Latest Release Notes) (Download Latest Version)

Windows utility that simplifies sideloading of drivers and extensions.

The platform’s own license key, or a CPLLC site license key, is entered in the platform’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.

All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.

Buyer beware: Navien does not publish an API for this product. This platform uses the unpublished protocol Navien’s own app uses, which Navien can change or turn off at a moment’s notice, without warning. If that happens the platform may stop working until it can be updated, and it may not be possible to update it.

Platform Installer Options

  • Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
  • Enter License Key – The Navien Platform license key. Leave blank when the site has a CPLLC site license.
  • NaviLink Email – The email address used to sign in to the NaviLink app.
  • NaviLink Password – The password of that account.
  • Polling Seconds – How often every heater is read, 30 to 3600 seconds (default 30).

Water Heaters

Each heater is a Crestron Home device named as it is in the NaviLink app. Its tile shows what it is doing (Off, Idle, Heating, Water Flowing, or Offline); its page has a switch or a − / + control for each setting its model has, then its status, the temperature of the water leaving it and its readings. A change made here is sent to NaviLink, which passes it to the heater within a few seconds; a change made at the heater or in the app shows at the next read.

Water Heaters Installer Options

  • Show on Home Screen – Shows the heater’s tile on the Home screen (default off).
  • Show in Room Screen – Shows the heater’s tile in its room (default on).
  • Starting Pin Code – A numeric PIN that must be entered before the page’s controls work. Blank means no PIN (the default).
  • Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).

Water Heaters Actions

  • Power On / Power Off – Turns the heater on or off.
  • Heating On / Heating Off – On a combi-boiler, turns the house’s heating on or off.
  • Hot Button On / Hot Button Off – On a heater with recirculation on demand, starts or ends a recirculation run.
  • Set Water Temp / Set Heating Temp – Sets the hot water or the heating water temperature, in the heater’s own scale, within its range.
  • Extension Enable / Extension Disable – Enables or disables the heater in Crestron Home. A disabled heater shows Disabled and ignores its tile and page.

Water Heaters Events

  • Cycle Started / Cycle Ended – The heater started heating or delivering hot water, or stopped.
  • Power On / Power Off – The heater was turned on or off, from Crestron Home, the app or its front panel.
  • Heating On / Heating Off – The house’s heating was turned on or off.
  • Hot Button On / Hot Button Off – A recirculation run started or ended.
  • Error – The heater reported an error code.
  • Appliance Offline / Appliance Online – The heater or NaviLink stopped answering, or answered again.
  • Extension Enabled / Extension Disabled – The heater was enabled or disabled in Crestron Home.
  • Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.

Sequences

Every heater’s actions and events are listed under Water Heaters. The controls on a device’s page are also states a sequence’s If (Conditional) step can test: on / off as “<name> Is On”, open / close as “<name> Is Closed”, “Pin Is Locked”, sliders and drop-downs by their value, and a thermostat’s temperature and setpoints. Crestron Home lists a “Changed” event for each state, raised whenever it changes. Devices Crestron Home draws itself (lights, locks, shades) keep Crestron Home’s own states.

Navien and NaviLink are trademarks of their respective owners. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This platform is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owners of Navien and NaviLink.