Description
Requires Crestron Home OS 4.12 or later.
TESTERS WANTED
This extension has not yet been tried on a Pentair ScreenLogic: it is built to the protocol and checked in the CPLLC lab without the hardware. If you have a Pentair ScreenLogic on a Crestron Home system and can try it, please contact us. The two-hour trial is enough to tell whether it works, and your report decides what gets fixed first.
The CPLLC Pentair ScreenLogic extension brings a Pentair IntelliTouch, EasyTouch or SunTouch pool system into Crestron Home through its ScreenLogic protocol adapter, as a tile with a page of its own. The page has a switch for the pool and the spa and for each light and feature circuit, each heater’s setpoint and heat mode, the IntelliBrite and MagicStream color shows and the chlorinator’s output, and the water and air temperatures, salt level and IntelliChem readings below them. Every control has its sequence actions and events. It talks to the adapter directly on the home network, and the adapter reports every change as it happens, so the page follows the pool equipment at once, whether it was changed from Crestron Home, the system’s own panel, the ScreenLogic app or a schedule.
Drivers->Pool Controller->Pentair->ScreenLogic (Latest Release Notes) (Download Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
The extension’s own license key, or a CPLLC site license key, is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Installer Options
- IP Address / Hostname – The ScreenLogic adapter’s address. Leave blank to find it on the processor’s networks.
- Port – The adapter’s port, 80 to start. With the address left blank, the port the adapter reports is used.
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Pentair ScreenLogic license key. Leave blank when the site has a CPLLC site license.
- Show on Home Screen – Shows the tile on the Home screen (default off).
- Show in Room Screen – Shows the tile in its room (default on).
- Only Display Tile – Shows the tile alone, with no page of controls (default off).
- Starting Pin Code – A numeric PIN that must be entered before the page opens. Blank means no PIN (the default).
- Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).
Actions
- Pool Filter On / Pool Filter Off – Turns the pool (or spa) on or off; the same for each light and feature circuit (Spa Light On, Waterfall Off …).
- Set Pool Heater Setpoint °F – A body’s heat setpoint, in the system’s own scale.
- Set Pool Heater Heat Mode – Off, Heater, and Solar and Solar Preferred with solar, or Heat Pump and Heat Pump Preferred with a heat pump; with a hybrid heater Off, Hybrid, Gas Only, Heat Pump Only and Dual.
- Light Shows On / Light Shows Off – All the color lights on or off.
- Set Light Shows Effect – A show or color for every color light.
- Set Chlorinator Output % – The chlorinator’s pool output, 0 to 100 %.
- Extension Enable / Extension Disable – Enables or disables the device. A disabled device shows Disabled, ignores its controls and raises no events.
Events
- Pool Filter On / Pool Filter Off – A body, light or feature turned on or off.
- Pool Heater Heat Mode is <mode> – A body’s heat mode changed.
- Light Shows Effect is <show> – A show was chosen.
- Pool Offline / Pool Online – The adapter can’t be reached; it can again.
- Extension Enabled / Extension Disabled – The device was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered (with a Starting Pin Code set).
Pentair, ScreenLogic, IntelliTouch, EasyTouch, SunTouch, IntelliBrite, MagicStream, IntelliChlor and IntelliChem are trademarks of their respective owners. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This extension is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owners of Pentair, ScreenLogic, IntelliTouch, EasyTouch, SunTouch, IntelliBrite, MagicStream, IntelliChlor and IntelliChem.



