Description
The CPLLC Logic Xor is a Crestron Home logic gate. The installer names up to 20 signals; each is either Active or Inactive, and sequences raise and lower them. The extension’s output is active when an odd number of named signals is active: whenever it changes, it runs the Signal Active or Signal Inactive event, so a sequence can act on the combined state of many conditions (doors closed, people home, modes set). The tile shows the output, and its page shows every signal with a green or red icon. It is for logic only: it reads and drives no hardware by itself.
Drivers->Logic->Control Programming LLC->Xor (Latest Release Notes) (Download Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
Valid Crestron Home icon names are listed here. All icon names begin with the letters “ic”, for example “icStop” or “icPlay”.
The extension’s own license key, or a CPLLC site license key, is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Installer Options
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Logic Xor license key. Leave blank when the site has a CPLLC site license.
- Show on Home Screen – Shows the tile on the Home screen (default off).
- Show in Room Screen – Shows the tile in its room (default on).
- Starting Pin Code – A numeric PIN that must be entered before the signals are shown. Blank means no PIN (the default). A new Starting Pin Code replaces a PIN changed from the keypad, so a forgotten PIN can be reset here.
- Seconds Pin Active – How long the signals stay unlocked after the last touch (default 10 seconds; 0 also means 10).
- Only Display Tile – Shows only the tile, with no control page, so end users cannot toggle the signals (default off). Sequences still raise and lower them. A Starting Pin Code or Show on Home Screen still gives the tile its page.
- Active Icon – The tile’s icon while the output is Active (default icRemoteButtonGreen), by its name in the Crestron Home icon library.
- Inactive Icon – The tile’s icon while the output is Inactive (default icRemoteButtonRed).
- Signal 01 – 20 – The signal’s name, shown on the control page and offered by Raise Signal and Lower Signal. Leave it blank when the signal is not used. Give each signal a different name: the sequences choose a signal by its name.
Actions
- Raise Signal – Makes the signal chosen from the list Active.
- Lower Signal – Makes the signal chosen from the list Inactive.
- Extension Enable / Extension Disable – Enables or disables the extension. A disabled extension shows Disabled and ignores the signals.
Events
- Signal Active – The output turned Active. Also runs again after a restart while the output is Active.
- Signal Inactive – The output turned Inactive. Also runs again after a restart while the output is Inactive.
- Extension Enabled / Extension Disabled – The extension was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.
