Description
Requires Crestron Home OS 4.12 or later.
The CPLLC Wake-on-LAN is a Crestron Home tile with a page of up to 10 devices, each of which it turns on over the network with a Wake-on-LAN “magic packet”. The installer enters each device in one installer setting as name|icon|MAC address, with the device’s IP address after a fourth | when it is on another network. Pressing a device, on the page or from a sequence, wakes it and runs the device’s “Pressed <name>” event. It suits media and theater PCs, media servers, NAS units, game consoles, and the TVs and receivers whose network control works only once they are on, so a sequence can wake them before it sends anything else.
Add Device->Drivers->Custom Device->Control Programming LLC->Wake-on-LAN, or search for “Wake-on” (Latest Release Notes) (Download Latest Version)
Windows utility that simplifies sideloading of drivers and extensions.
Valid Crestron Home icon names are listed here. All icon names begin with the letters “ic”, for example “icStop” or “icPlay”.
The extension’s own license key, a CPLLC Toolkit license key or a CPLLC site license key is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a Toolkit or site license key once for every CPLLC driver it covers.
All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.
Installer Options
- Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
- Enter License Key – The Wake-on-LAN license key. Leave blank when the site has a CPLLC Toolkit or site license.
- Show on Home Screen – Shows the tile on the Home screen (default off).
- Show in Room Screen – Shows the tile in its room (default on).
- Starting Pin Code – A numeric PIN that must be entered before the devices are shown. Blank means no PIN (the default). A new Starting Pin Code replaces a PIN changed from the keypad, so a forgotten PIN can be reset here.
- Seconds Pin Active – How long the devices stay unlocked after the last touch (default 10 seconds; 0 also means 10).
- Tile Icon – The tile’s icon until the first device is woken (default icPower).
- Page Header Text – The control page’s title, and the tile’s status until the first device is woken. Blank shows “Wake-on-LAN”.
- Device 01 – 10 – The device in one box, as Parameter 1|Parameter 2|Parameter 3|Parameter 4: parameter 1 is the device name, parameter 2 is the icon, by its name in the Crestron Home icon library, parameter 3 is the device’s MAC address, and parameter 4, which may be left off, is its IP address or its network’s broadcast address when it is on a network the processor is not on. The name also names its event (“Pressed <name>”) and its entry in Select Device. Leave the box blank to hide the device. Give each device a different name: Select Device wakes the first one with the name chosen.
Actions
- Select Device – Wakes the device chosen from the list of device names, as a touch on the page does: its magic packet is sent, its Pressed event runs and the tile shows it.
- Extension Enable / Extension Disable – Enables or disables the tile. A disabled tile shows Disabled and wakes nothing.
Events
- Pressed <name> – The device was pressed, from the page or by Select Device, and its magic packet was queued to send.
- Extension Enabled / Extension Disabled – The tile was enabled or disabled.
- Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered.
Crestron and Crestron Home are trademarks of Crestron Electronics, Inc.

