Hayward OmniLogic

$150.00

The CPLLC Hayward OmniLogic extension brings a Hayward OmniLogic, OmniPL or OmniHub pool controller into Crestron Home as a tile with a page of its own.

TESTERS WANTED

Not yet tried on a Hayward OmniLogic. Contact us to help test it.

SKU: CPLLC.SDK.Hayward.OmniLogic Category:

Description

Requires Crestron Home OS 4.12 or later.

TESTERS WANTED

This extension has not yet been tried on a Hayward OmniLogic: it is built to the protocol and checked in the CPLLC lab without the hardware. If you have a Hayward OmniLogic on a Crestron Home system and can try it, please contact us. The two-hour trial is enough to tell whether it works, and your report decides what gets fixed first.

The CPLLC Hayward OmniLogic extension brings a Hayward OmniLogic, OmniPL or OmniHub pool controller into Crestron Home as a tile with a page of its own. The page has a switch for each filter, light, relay, valve and pump, the filter and pump speeds, each heater’s setpoint and heat mode, and each ColorLogic light’s show, and the water and air temperatures, salt level and CSAD readings below them. Every control has its sequence actions and events. It talks to the controller directly on the home network, reads it every 30 seconds and right after every command, so the page follows changes made at the controller, in the Hayward app or by a schedule within half a minute.

Drivers->Pool Controller->Hayward->OmniLogic (Latest Release Notes) (Download Latest Version)

Windows utility that simplifies sideloading of drivers and extensions.

The extension’s own license key, or a CPLLC site license key, is entered in the extension’s Enter License Key option. The License Manager is not required, but it is the convenient place to enter a site license key once for every CPLLC driver.

All license purchases are final and non-refundable. Every CPLLC driver works fully for two hours without a key: test it on your processor before you buy. See the Terms of Use.

Installer Options

  • IP Address / Hostname – The OmniLogic’s IP address. Required: the controller can’t be searched for.
  • Port – 10444, the controller’s own port.
  • Obtain License Key – Opens CPLLC.net, where license keys and site licenses can be purchased.
  • Enter License Key – The Hayward OmniLogic license key. Leave blank when the site has a CPLLC site license.
  • Show on Home Screen – Shows the tile on the Home screen (default off).
  • Show in Room Screen – Shows the tile in its room (default on).
  • Only Display Tile – Shows the tile alone, with no page of controls (default off).
  • Starting Pin Code – A numeric PIN that must be entered before the page opens. Blank means no PIN (the default).
  • Seconds Pin Active – How long the page stays unlocked after the last touch (default 10 seconds).

Actions

  • Pool Filter On / Pool Filter Off – Turns a filter on or off; the same for each light, relay, valve and pump (Waterfall On, Jets Off …).
  • Set Pool Filter Speed % – A variable-speed filter’s or pump’s speed.
  • Set Pool Heater Setpoint °F – A body’s heat setpoint.
  • Set Pool Heater Heat Mode – Off, Heat, and Cool and Auto for a heat pump that cools.
  • Set Pool Light Effect – A ColorLogic light’s show.
  • Extension Enable / Extension Disable – Enables or disables the device. A disabled device shows Disabled, ignores its controls and raises no events.

Events

  • Pool Filter On / Pool Filter Off – A filter, light, relay, valve or pump turned on or off.
  • Pool Heater Heat Mode is <mode> – A body’s heat mode changed.
  • Pool Light Effect is <show> – A light’s show changed.
  • Pool Offline / Pool Online – The controller stopped answering; it answers again.
  • Extension Enabled / Extension Disabled – The device was enabled or disabled.
  • Pin Locked / Pin UnLocked – The PIN keypad locked again, or the right PIN was entered (with a Starting Pin Code set).

Hayward, OmniLogic, OmniPL, OmniHub, ColorLogic, Pentair and Zodiac are trademarks of their respective owners. Crestron and Crestron Home are trademarks of Crestron Electronics, Inc. This extension is an independent product of Control Programming LLC and is not affiliated with, endorsed by or sponsored by the owners of Hayward, OmniLogic, OmniPL, OmniHub, ColorLogic, Pentair and Zodiac.